R&S®RTO Digital Oscilloscopes

Scope of the Art

Specifications

Vertical system
Input channels R&S®RTO1002/R&S®RTO1012/R&S®RTO1022 2
  R&S®RTO1004/R&S®RTO1014/R&S®RTO1024/R&S®RTO1044 4
Bandwidth (–3 dB) at
50 Ω		 R&S®RTO1002 and R&S®RTO1004 600 MHz
  R&S®RTO1012 and R&S®RTO1014 1 GHz
  R&S®RTO1022 and R&S®RTO1024 2 GHz
  R&S®RTO1044 4 GHz
Rise time (calculated) R&S®RTO1002 and R&S®RTO1004 583 ps
  R&S®RTO1012 and R&S®RTO1014 300 ps
  R&S®RTO1022 and R&S®RTO1024 175 ps
  R&S®RTO1044 100 ps
Input impedance   50 Ω ±1.5 %
1 MΩ ±1 % with15 pF (meas)
Input sensitivity max. bandwidth in all ranges 50 Ω: 1 mV/div to 1 V/Div
1MΩ: 1 mV/div to 10 V/Div
Effective number of bits (ENOB) of the A/D converter full-scale sine, frequency < –3 dB bandwidth > 7 bit (meas)
Acquisition system
Max. sampling rate (realtime)   10 Gsample/s per channel
  R&S®RTO1044 10 Gsample/s on each channel
20 Gsample/s with two active channels
Memory depth standard configuration, per channel/1 channel active R&S®RTO: 2-channel-model: 20 /40 Msample
R&S®RTO: 4-channel-model 20 /80 Msample
  max. upgrade (R&S®RTO-B102 option),
per channel/1 channel active		 R&S®RTO: 2-channel-model: 100 /200 Msample
R&S®RTO: 4-channel-model: 100 /400 Msample
Max. acquisition rate continuous aquisition and display,
10 Gsample/s, 1 ksample		 1 000 000 waveforms/s
  ultra-segmented-mode < 200 ns blind time
Decimation modes any combination of decimation mode and waveform arithmetics on up to 3 waveforms per channel Sample, Peak Detect, High Resolution,
Root Mean Square
Waveform arithmetics   Off, Envelope, Average
Interpolation modes   Linear, Sin(x)/x, Sample&Hold
Horizontal system
Time base range   25 ps/div to 50 s/div
Time base accuracy after delivery/calibration 2.5 ppm
  after delivery/calibration
 (R&S®RTO-B4 option)		 0.02 ppm
Channel deskew   ±100 ns (realtime deskew, channel-to-channel trigger - e.g. State - detect deskew)
Trigger system
Trigger types   Edge, Glitch, Width, Runt, Window, Time-out, Interval, Slew Rate, Data2Clock, Pattern, State, Serial Pattern, I²C, SPI,
optional: UART/RS-232, LIN, CAN, FlexRay
Sensitivity definition of trigger hysteresis can be set autimatically or manually
from 0.1 div to 5 div
Min. detectable glitch   100 ps
  R&S®RTO1044 50 ps
Coupling modes   same as selected channel, optional RF suppression with selectable cutoff frequency from 100 kHz to 50 % of analog bandwidth
Waveform maths
Algebraic categories   mathematics, logical operations, comparison, frequency domain, digital filter
Hardware-accelerated
mathematics		 +, -, *, 1/x, |x|, derivative, log10, ln, log2, scaling,
FIR, FFT magnitude
Analysis and measurement functions
Hardware-accelerated analysis   spectrum, histogram, mask test, cursor
Hardware-accelerated measurements   amplitude measurements, time measurements
General data
Dimensions W x H x D 427 mm x 249 mm x 204 mm
(16.81 in x 9.8 in x 8.03 in)
Weight R&S®RTO1024 9.6 kg (21.16 lb)
Display   10.4" LC TFT color touch screen,
1024 x 768 pixels (XGA)
Connectivity   1 Gbit/s LAN, 4 x USB 2.0, GPIB (optional), DVI for external monitor, external trigger